S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten
-
Clamp the cable harness at the tow hitch. Tighten the clamp(s) (4).
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten
-
Leave the bracket hanging down as illustrated
-
Secure the cable harness at the tow hitch member on each side of the tow hitch. Use a tie strap (4) from the kit
-
Position the tie straps according to the listed dimensions
-
Do not tighten the clamps fully yet.
Cargo compartment preparations
-
Fold the cargo compartment carpet (1) out of the way
-
Turn the clips (2). Fold in the side panels on both sides
-
Remove the two covers (3). Remove the screws (4) underneath the covers. Grip the outer edges of the panel (5). Pull the panel inwards towards the
centre so that the clips release at the sides. Disconnect the connectors (6) for the side lamps. Remove the panel by pulling it straight upwards so
that the clips release from the rear crossmember.
