S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Secure the cable harness to the cable harness behind the battery with a tie strap (2) from the kit.
-
Connect the routed ground cable to the grounding point (3) behind the battery and tighten the grounding screw securely.
-
Detach the trailer module (TRM) from the front edge of the cover on the ventilation opening along the rear edge of the left-hand rear wheel
housing.
-
Plug in the tow bar wiring connectors:
-
green (GN) and grey (GR) connectors to the control module.
-
black (SB) connector to the fuse holder.
-
Reinstall the control module.
-
Secure the excess cable with a tie strap from the kit.
-
Insert fuses from the kit in the following positions in the fuse holder (REM):
-
20A in position 20 (mini fuse) if the charging function has been selected.
-
25A in position 29
-
25A in position 30
-
Reinstall the side panel.
-
Reinstall the folding panel.
-
Reinstall the battery cover and bracket if applicable.
