S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Take the cable harness and the protective cover from the kit
-
Secure the protective cover on the 4-pin connector.
-
Take the connector holder from the kit
-
Position the connector in the connector holder. Press the two halves of the holder together.
Note! Ensure that the retention strap for the protective cover is not trapped, but aligns in the groove in the connector holder.
-
Take the bracket and the two smaller screws and the nuts from the kit
-
Tighten the bracket for the connector holder.