volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 24881 > < Adapter 7 to 4 Pole Wiring For Towing|Page 24879
Page 47
background image

-

Reinstall the protective cover and the bracket for the battery.

-

Reconnect the connectors for the side lamps

-

Reinstall the panels.

-

Re-position the cargo compartment carpet. Alternatively, reinstall the storage hatch and the floor hatch.

Checking the 7-pin connector

Tow Hitch Wiring, 13-Pin

Tow Hitch Wiring, 13-pin

NOTE:  The relay and fuses are not included in the kit.

Installing the connector

Installing the connector for detachable tow bars

-

Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten.

-

Route the cable harness behind the screw (4) on top of the tow bar. Then route the cable harness down past the bracket (5)

-

Clamp the cable harness at the bracket. Tighten the clamps (6).

Adapter 7 to 4 Pole Wiring For Towing|Page 24881 > < Adapter 7 to 4 Pole Wiring For Towing|Page 24879