S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Route the cable harness from the tow bar socket through the hole in the floor
-
Adjust the position of the rubber seal (2) so that there is not excessive cable slack under the car
-
Install the rubber seal in the hole
-
Route the cable as illustrated. Clamp the existing cable harness in the sill trim panel. Ensure that the cable harness is not impeded by the battery
holder and the protective cover
-
Connect the cable harness connector (1) to the existing connector (3).
Connection
Install the correct fuse/relay depending on the model (year) and desired function
Applies when connecting the fog tail lamp function
-
Install the relay in the rear electronic module, terminal MI 7.
Applies when connecting the automatic shut-off function for the fog tail lamp
NOTE: This function requires software unique to the car.
Program the software according to the service information in VADIS.
