S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Document information
Protective panel
Applies to diesel engine cars
On diesel engine cars, the left air baffle must not be used.
-
Turn the protective panel around
-
Drill out the four pop rivets (1). Remove the air baffle
-
Remove the drill and rivet swarf.
-
Raise the car
-
Remove the air baffle (1) by slackening off the screws (2).
-
Lift up the protective panel towards the subframe. Install the small screws in the front holes (1). Position all the washers between the sub frame
and the protective panel in the right hole. Loosely screw the screws into place
