S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Seat Cover: Service and Repair
Rear Seat, Passenger Seat
Upholstery Back Rest, Replacing
Upholstery back rest, replacing
Note! To carry out this work a zip fastener is required. This is not included in the upholstery but is ordered separately. 6 mm zip fastener part
number: 3533976 is used and in some cases zip fastener 4 mm, part number: 9459316
Replacing backrest upholstery 1
Remove:
-
the backrest. See Backrest See: Seat Back/Service and Repair/Backrest Backrest See: Seat Back/Service and Repair/Backrest
-
the centre armrest / integrated child seat. See Center arm rest/integrated child seat See: Interior Moulding / Trim/Arm Rest/Service and
Repair/Center Arm Rest/Integrated Child Seat.
Take out and open the zip fastener lock.
Remove:
-
the edge trim panel in the opening for the hatch for long loads
-
release from the hatch opening by bending the tongues upwards.
Replacing backrest upholstery 2
Remove:
-
the central head restraint. See Center head restraint See: Head Rest/Service and Repair/Center Head Restraint
-
the central head restraint sleeves. See Central head restraint sleeves See: Head Rest/Service and Repair/Central Head Restraint Sleeves
-
the hatch for long loads. See Lock the hatch for long loads See: Service and Repair/Removal and Replacement/Rear Seat/Lock the Hatch For Long
Loads
-
the outer head restraint. See Outer head restraint See: Head Rest/Service and Repair/Outer Head Restraint.
Remove the 7 half moon clips at the bottom edge of the backrest.
Open the other zip fastener.
Remove all half moon clips from the reverse of the upholstery.
Slide off the upholstery.