volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Traction Control Module|Description and Operation > < Electrical Specifications|Page 18261
Page 4
background image

Signal Specifications Table (Part 4 Of 4)

All the values given are between the relevant terminal in column 1 and terminals #A15 or #A46 (ground), unless otherwise indicated in brackets.

Note:  It is important that the breakout box is connected and that the ground terminals have been checked before readings are taken.

U = DC voltage in volts (V) 
I = current in amperes (A) 
f = Frequency in Hertz (Hz) 
Ubat = battery voltage (V) 
Ulow = voltage approximately O V

Traction Control Module|Description and Operation > < Electrical Specifications|Page 18261