volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 5444 > < Procedures|Page 5442
Page 1
background image

Intake Manifold: Removal and Replacement

Intake Manifold/Gasket, Replacing

Intake Manifold/Gasket, Replacing 

Special Tools:  951 2666

NOTE:  As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Replacing the intake manifold and gasket 

Removing the intake manifold and gasket 
Disconnect the battery negative lead.

Drain the fuel injection system.

Remove: 

-

the cover over the ignition coils

-

the crankcase ventilation hose from the top of the cam cover

-

the inlet hose from the air cleaner (ACL) and throttle body (TB)

-

the hose for the vacuum controlled crankcase ventilation from the inlet hose

-

the protective cover over the nozzle connectors

-

the connectors from the nozzles.

Procedures|Page 5444 > < Procedures|Page 5442