S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Connect the cable harness connectors to the sensors.
NOTE: A click should be heard when connecting. The noise confirms that the catch has locked.
-
Install the sensors in the holders.
-
Clean the inside (1) of the bumper cover where the cable harness is to be secured. Use primer (P/N 8637076) on the cleaned surfaces.
-
Cut out a recess (1) in the right hand inside of the foam to make room for the cable harness for the sensors
-
Reinstall the foam in the bumper cover.
