S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Tape the fuel pump's fuel lines/electrical wiring to the plastic pipe.
Pull the wiring out of the hole for the level sensor. Remove the plastic pipe and the tape. Check that there is no tape/adhesive residue on the wiring.
Pull the wiring forwards and backwards to check that it has not bent or got trapped.
Finishing
-
Install the sensor, backrest, side cushion and seat cushion. See Draining the fuel tank See: Powertrain Management/Fuel Delivery and Air
Induction/Service and Repair.