S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Brake Light Switch: Description and Operation
Stop (Brake) Lamp Switch
The stop (brake) lamp switch is a single pole switch positioned at the brake pedal lever. It self adjusts during its installation.
The stop (brake) lamp switch transmits signals informing the control module that braking has started. The control module interrupts any traction
control and goes to standby mode for ABS / EBD control, which means that the control module can make more accurate calculations. If the
control module does not receive a signal from the stop (brake) lamp switch, there is still ABS control available but the control is more vigorous at
the start of the ABS control.
The stop (brake) lamp switch is supplied with power from the battery. When the switch closes, the stop (brake) lamp lights and the control module
receives a signal that braking is occurring. In All-wheel drive (AWD) cars equipped with TRACS, the stop (brake) lamp switch has two switches
to ensure that traction control stops when braking. If a fault occurs in the stop lamp switch signal the traction control in the TRACS function is
reduced from operating on all the wheels to operating on the front wheels only. There are diagnostics for the stop (brake) lamp switch.
