S60 2.4 L5-2.4L VIN 61 B5244S (2001)
1. Turn signal lamps
2. Parking lamps
3. Dipped beam
4. High beam.
Installation
Headlamps
-
Position the headlamp
-
Position the washer hose through the hole on the bracket for the wiper motor
-
Pull out the top edge of the casing. Position the headlamp
-
Thread in the upper screws
-
Check the position of the air bleed hoses
-
Pull the casing down from the guide
-
Thread in the outer and inner screws
-
Press in the headlamp. Tighten the upper screws
-
Tighten the outer and inner screws
-
Install the holder and guide for the cover
-
Everything else is installed in reverse order
-
Check and adjust the headlamp beam. See Headlamps, aligning See: Adjustments.