S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Ignition on
-
Click on the symbol for VCT2000 to read off the programmed values.
The retained values are programmed customer parameters in the upper electronic module (UEM). The retained values should be noted for later use.
Other information
-
For information about programming the customer parameters, see Diagnostic functions See: Body and Frame/Body Control Systems/Description
and Operation/Upper Electronic Module (UEM)/Diagnostic Functions.
Continue - Replacing control modules and downloading software
-------------------------------------------------
Replacing control modules and downloading software
Caution! A new control module is delivered without software. In order for the control module to function new software must be programmed
into the control module after it has been replaced.
Replace the control module and download the new software. See Upper electronic module (UEM) rear view / door mirror, replacing See: .