S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Check that the two springs (1) are in position
-
Press the two connectors for the sender cables for the airbag into the steering wheel module.
Note! The wiring must be routed through the existing holder (2).
-
Insert the two pins on the reverse of the steering wheel module in the two springs. Ensure that the sender cables are unimpeded
-
Press the steering wheel module into the mountings. Two clicks should be heard.
-
Turn the ignition key to position II
-
Reconnect the battery negative lead.