S60 2.4 L5-2.4L VIN 61 B5244S (2001)
For the location of the fuses, see:
-
Wiring diagram for relevant model year
-
Decals at both the integrated relay box and fusebox in the car
-
Pocket data book
-
Owner's Manual.
Removing the integrated relay/fusebox in the cargo compartment
-
Expose the integrated relay/fusebox.
-
Release the catch on the top as illustrated. Fold down the integrated relay/fusebox and lift up to release it.
Installing the integrated relay/fusebox in the cargo compartment
-
Install the integrated relay/fusebox. Ensure that the catches on the top engage correctly
-
Install the upholstery
-
Reinstall the floor hatch.
Rear electronic module
Preparations
CAUTION: New software can only be ordered after the control module has been installed in the car. VADIS reads off the new control module
identity which is required to order the correct software.
Always check that the control module and control module box connectors do not have bent or damaged terminals or socket/sleeves. This may have been
the cause of the fault.
Removing the control module
