S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Steering Column Control Module: Description and Operation
SWM Car Communication Information
Description of parameters
NOTE: The parameters that can be read off for the steering wheel module display how the steering wheel module interprets the position on the buttons
and control stalks. In the event of a fault in the buttons or the wiring, the status will be constantly On or Off depending on the position on the buttons and
control stalks.
High beam flash, status
The value is displayed if the high beam flash is activated.
Not activated
Flash
Rocker position high beam/low beam
Read button, status
The value indicates if the read button is pressed in.
Not activated
Activated
Reset button, status
The value indicates if the reset button is pressed in.
Not activated
Activated
Right-hand turn signal lamps, status
This value indicates whether the right-hand turn signal lamps are activated.
Not activated
Activated
Left-hand turn signal lamps, status
This value indicates whether the left-hand turn signal lamps are activated.
Not activated
Activated
Cruise control on/off button, status
This value indicates whether the cruise control on/off button is pressed in.
Not activated
Activated
Cruise control +button, status
This value indicates whether the +button is pressed in.
Not activated
Activated
Cruise control -button, status
The value indicates whether the -button is pressed in.
Not activated
Activated
Cruise control resume button, status
This value indicates whether the cruise control resume button is pressed in.
Not activated
Activated
Cruise control disengage button, status
