S60 2.4 L5-2.4L VIN 61 B5244S (2001)
Installing service clips
Note! The automatic transmission has a gear selector cable while the manual transmission has two gear selector cables.
Ensure that the gear selector cable is engaged before fitting the blue clip. Press the clip into position as illustrated.
Check that the clip is positioned in the groove as illustrated.
Install the following items:
-
the gear selector assembly to the bodywork. Tighten to 25 Nm
-
the connector on the gear selector assembly.
Check that the gear positions are working.
Installing the center console
Install the center console. See Center console, replacing See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console,
Replacing.