S60 2.4 L5-2.4L VIN 61 B5244S (2001)
-
Assemble the hoses for flushing and air. Use an elastic band or tape
-
Position the reservoir
-
Locate the hoses
-
Press the soft nose and the guide out of the way. Then lift the reservoir up into position
-
Position the intake air pipe on the mounting on the reservoir
-
Lift up the reservoir. Position the intake air pipe on the input on the control module box
-
Thread in the screws
-
Check the position of the hoses
-
Tighten the screws
-
Install the remaining components in reverse order.