volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 20260 > < Adapter 7 to 4 Pole Wiring For Towing|Page 20258
Page 7
background image

On cars with Skidplate, the contact shall be turned 90° counter-clockwise in relation to the placement in Figure A.

Steps 7-16 apply to the S60

-

Fold back the carpet.

-

Remove the clips on the lower edge of the folding panel (on both the right-hand and left-hand sides) by pressing in the centre of the clip until an
audible snap is heard.

-

Remove the clips.

-

Unscrew the front clips.

-

Turn the knob (1) on the right-hand and left-hand sides 90°.

-

Fold the panels inwards. Lift the panels out.

-

First, pull the trunk lid sill trim panel (2) forwards until the two clips on the right-hand and left-hand sides release. Pull forcefully but carefully
since the panel is fitted tightly. Pull the panel straight up until the four clips in the lower edge release.

-

Remove the wiring (3) for the cargo compartment lighting.

-

Lift out the sill trim panel.

Adapter 7 to 4 Pole Wiring For Towing|Page 20260 > < Adapter 7 to 4 Pole Wiring For Towing|Page 20258