S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
Continue to route the DIN cable under the carpet along the door sills to the rear seat
-
Install the protective caps on the lugs (1) for the cable ducts.
Illustration A applies to cars up to and including model year -2004 (V70 CH -458999, XC70 CH -172999)
-
Take the power supply cable for the CD changer from the kit. Connect the ground lead to the front ground terminal (1) in the rear seat. Tighten to
10 Nm (7 lbf.ft.)
-
Route the DIN cable and the power supply cable to the right-hand side of the air duct (2), under the wiring. Continue up along the left-hand side of
the wheel arch and to the left-hand side of the rear crossmember. See the illustration.
Illustration B applies to cars from model year 2005- (V70 CH 459000-, XC70 CH 173000-)
-
Route the DIN cable (1) to the right-hand side of the air duct (2), under the wiring. Continue up along the left-hand side of the wheel arch and to
the left-hand side of the rear crossmember.
