S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Wrap foam tape around the two-pin connector.
8.
Install connector
Press in the new connector under the plastic
protection and secure the six-pin connector on the
holder.
Restore the insulation and reinstall the seat
cushion.
Service solution 2
S60, V70, S80, engine code 59 (B5254T2)
with steel tank,
Model year 2004 only. Steps 9 - 13.
9.
Exposing connector
Lift up the seat cushion and remove the backrest,
see:
Removal, replacement and installation
Body and interior
Interior
Rear seat, passenger seat, seat
Upholstery seat cushion, replacing
Upholstery back rest, replacing
