S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Applies only if the car has a lining mat with 4 perforations
-
Remove the perforated sections (3) from the lining mat.
Applies only if the car has a lining mat with 1 perforation
-
Remove the lining mat.
Applies to all cars
-
Remove the nuts (1) in the rear cross member. This allows the bumper to be removed
-
Separate the connector (2) for the antenna.
-
Raise the car.
Illustration 5A only applies to cars with mudguards
-
Remove the rear wheels
-
Carefully drill out the rivets holding the mudguard on both sides. Use a 6 mm (13/32") diameter drill bit
-
Remove the mudguards.
Illustration 5B applies to all cars