S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Remove the backing from the 3 pieces of tape.
Press the spoiler into place on the bumper cover in the join between the painted and unpainted sections of the bumper cover.
Install the rivets in the wheel arch, 1 on each side.
Note! If a spoiler has not previously been installed on the vehicle, a hole must be drilled using a - 5 mm diameter drill bit.Use the spoiler hole as
a template.
Install rivets on the underneath through the flexible hinge and through the holes in the bumper cover.
Install a washer at the top of the rivets. Tighten.
