S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Pull out the brake pedal screw as far as possible.
Press out the brake pedal bracket a little. Turn the pedal downwards and pull out the screw. The screw remains in the bracket.
Note! Take care that the stop lamp switch is not damaged when removing the brake pedal.
Check stop lamp switch
See Stop lamp switch, replacing See: Lighting and Horns/Brake Light Switch/Service and Repair.
Remove the bushings from the brake pedal
Push the guide sleeve out of the brake pedal.
Remove the bushings.
Install the bushings in the brake pedal