S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Install the cables in the connector with the opening for the primary lock facing up as illustrated. Press in the secondary lock.
Joining cables
Splice the new connector with cables to the existing wiring. See: Joining the cables See: Backup Lamp/Diagrams/Diagnostic Aids/Wiring/Joining the
Cables
Installing connectors
Install the connector with cables on the back-up lamp switch.
Install a tie-strap as illustrated so that the cable harness is not in contact with the gear selector cable.
Install the air cleaner (ACL) housing.
Test the function.