S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Left limit position:
-
Start the engine.
-
Turn the steering wheel to the left. Press the steering wheel to the limit position for a maximum of 5 seconds while reading off the manometer.
-
Correct pressure:
Pump A = 10.0-11.0 MPa
Pump B = 11.0-12.0 MPa
Right limit position:
-
Turn the steering wheel to the right limit position and read the manometer according to the previous operation.
If the correct value is not reached there is an internal leak in the steering gear. The steering gear must then be replaced by a new one.
Checking the power steering balance when turning the steering wheel
-
Start the engine.
-
Turn the steering wheel to the right limit position and release.
Connect torque wrench 999 8081 to the steering shaft screw and turn to the right with the torque wrench at the limit position to pressure level 1 on the
manometer. Release the torque on the steering wheel.