S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Steering Wheel: Adjustments
Steering Wheel Position, Adjusting
Steering wheel position, adjusting
Special tools:
998 8695 TEST DEVICE See: Tools and Equipment/998 8695 Test Device
Caution! Cars with DSTC systems. When working on the steering or wheel alignment, the adaptation of the steering wheel angle must be set to
zero using the diagnostic tool. Test drive according to Test Drive Form (DSTC (dynamic stability and traction control) /brake control module),
description See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial Inspection and
Diagnostic Overview/Test Drive Form (DSTC (Dynamic Stability And Traction Control) /Brake Control Module), Description.
Checking the steering wheel position
-
Drive the car straight forward. Check that the steering wheel is in the "straight ahead" position
-
If the steering wheel position is incorrect adjust as follows.
Adjusting the steering wheel position
Remove the steering wheel
-
Remove the steering wheel module according to Steering wheel module (SWM), replacing See: Relays and Modules - Steering/Steering Column
Control Module/Service and Repair.
-
Remove the locking screw from the ""parking hole"" in the steering wheel and install it in the contact reel.