S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Rear Cross-Member: Service and Repair
Sub-frame rear, replacing
Special tools: 999 5659
Removing the sub-frame
Preparations
Raise the car.
Note: Lift the sill edges so that the rear axle is free.
Remove
-
the wheels
-
the mounting screws for the brake caliper
-
the ABS sensor
-
The mountings for the ABS line. Hang up the line and the brake caliper. Use a piece of wire
-
the screw for the bracket for the brake pipe on the sub-frame
-
the locating pin for the brake disc
-
the brake disc.
-
the return spring at the expander
-
the expander. Lift the brake shoe slightly.
Unhook the expander (1) from the mounting for the mechanical cable.
-
the guide sleeve for the cable sleeve. Apply a screwdriver between the guide sleeve lug and wheel arch. Pry apart slightly to remove the sleeve.
-
the parking brake cable from the tie rod and sub-frame
-
the exhaust system.