S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Knock the seal into the bevel gear. Use drift 999 7087 Drift See: Tools and Equipment/999 7087 Drift together with spacer ring 7086-1. Ensure that the
tool goes towards the bevel gear housing. Check that sleeve 7087-1 is removed with the tool.
Finishing
Installing the bevel gear
Install the bevel gear.
Filling with oil
Fill with new oil. See Pinion seal bevel gear, replacing, B5254T2, M58, B5254T2, AW50/51 AWD See: Pinion Seal Bevel Gear, Replacing
Sealing Ring, Gear Shift Linkage Rod, Replacing
Sealing ring, gear shift linkage rod, replacing
Special tools:
999 5476 PUNCH See: Tools and Equipment/999 5476 Punch
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information is always correct.
Removing engine compartment components