S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
Wheel Bearing: Service and Repair
Replacing the Rear Wheel Hub
Replacing The Rear Wheel Hub
Special tools:
951 2050
Removing the rear wheel hub
Raise the car.
Remove
-
the wheel
-
ABS sensor and the cable from the wheel spindle
-
the brake caliper mounting screws. Hang up the ABS line and the brake caliper. Use a piece of wire
-
the locating pin for the brake disc
-
the brake disc
-
the holder for the ABS line on the wheel spindle.
Press up the control arm slightly. Use a mobile jack.