S60 2.5T AWD L5-2.5L Turbo VIN 59 B5254T2 (2004)
-
the O-ring from the throttle valve seat in the coupling housing.
Installation
Installing components
Install
-
control module
-
the sealing plate
-
washer
-
the throttle valve with O-rings
-
the temperature/pressure sensor with O-ring
-
the O-ring for the throttle valve seat
-
the screws.
Components that are included in the kit and must be replaced
-
the temperature/pressure sensor with O-ring
-
washer
-
the O-ring for the throttle valve seat.
Position the sealing plate in the control module
Press the throttle valve and temperature/pressure sensor into place on the control module contacts. Place the cupped washer with the convex side
against the temperature/pressure sensor.
Lubricate the sealing rings on the valves with oil, P/N 1161641-4 (0.3 liters).
Installing the O-ring
