S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Remove the dummy plug from the hole in the body, see the illustration (battery draining is not affected).
Note! It is only possible to connect one of the functions (rear fog lamps, charging or reversing lamps) according to steps Tow bar wiring, 7-pin
See: - Tow bar wiring, 7-pin See: . You can also choose not to connect any of the functions.
If the rear fog lamp function will be used: Illustration A
-
Carefully press down the small catch in the locking mechanism for the grey (GR) 12-pin connector with a small screwdriver. Pull out the locking
mechanism until it stops.
Illustration B
-
Connect the blue (BL) cable to position 2 in the connector.
-
Move the locking mechanism back to locked position.
-
Insulate the cable terminal and secure the blue (BL) cable if it is not intended for connection.
If the charging function will be used: Illustration A
