S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Connect the ground lead to the existing ground terminal on the left-hand side in the rear member. Torque tighten to 24 Nm (18 lbf.ft.).
-
Route all the cable excess into the space under the left tail lamp.
-
Secure the wiring using two cable ties from the kit.
-
Make sure that the wiring does not chafe against sharp edges.
-
Secure the relay holder with relay and fuse holder with fuse, at existing cable harnesses.
-
Secure the long cables at existing cable harnesses using cable ties.
-
Make sure that the wiring does not chafe against sharp edges.
