volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 21473 > < Adapter 7 to 4 Pole Wiring For Towing|Page 21471
Page 19
background image

-

Carefully pull off the D-post panel. Start at the top edge then pull down until the three clips on the inside release. Do not damage the panel.

-

Disconnect the connector on the D-post panel (if the car has a loudspeaker in the D-post, the connector is in the loudspeaker).

-

Remove the panel by pulling upwards slightly and unhooking it from the side panel.

Illustration A

-

Fold out the load securing eyelet.

-

Insert a scriber with an angled tip into the hole in the top of the cover.

-

Turn the scriber so that the angled tip engages in the reverse of the cover (1). Pull the cover off.

Illustration B applies to cars with two rows of seats

Illustration C applies to cars with three rows of seats

Adapter 7 to 4 Pole Wiring For Towing|Page 21473 > < Adapter 7 to 4 Pole Wiring For Towing|Page 21471