volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 21950 > < Adapter 7 to 4 Pole Wiring For Towing|Page 21948
Page 4
background image

-

Press the centre of the clip into the lower edge of the folding side panels on the right-hand and left-hand sides until a click is heard.

-

Remove the two clips.

-

Remove the plastic nut along the front/lower edge of the side panel.

-

Turn the knob (1) on the right-hand and left-hand sides 90°.

-

Fold the panels inwards. Lift the panels out.

-

First, pull the bootlid sill trim panel (2) forwards until the two clips on the right-hand and left-hand sides release. Pull forcefully but carefully since
the panel is fitted tightly. Pull the panel straight up until the four clips in the lower edge release.

-

Remove the wiring (3) for the cargo compartment lighting.

-

Lift out the sill trim panel.

-

Remove the dummy plug from the hole in the body (battery draining is not affected).

Illustration A

Adapter 7 to 4 Pole Wiring For Towing|Page 21950 > < Adapter 7 to 4 Pole Wiring For Towing|Page 21948