volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 22005 > < Adapter 7 to 4 Pole Wiring For Towing|Page 22003
Page 16
background image

Applies to the XC90

Applies to cars with two rows of seats

-

Fold up the center rear floor hatch (1). If the underside of the floor hatch is equipped with a grocery bag holder, the holder is secured with a strap
at each end of the storage compartment. Detach the straps.

-

Remove the underlying storage compartment.

-

Remove the floor hatch by folding it almost completely closed and pulling it backwards from the mountings until it releases.

Applies to cars with three rows of seats and integrated carrier bag holder on the underside of the center floor hatch

-

Fold up the center rear floor hatch (1).

-

Detach the two straps on the underlying panel. Lift up the rear edge of the panel, fold the floor hatch back towards the panel and lift out the floor
hatch with the panel.

Part 2

Applies to cars with three rows of seats without an integrated carrier bag holder

-

Fold up the center rear floor hatch (1) at the rear edge and lift it out.

Applies to all models

-

Remove the left-hand side floor hatch (2).

-

Remove the folding side panel from the left-hand side in the cargo compartment.

Adapter 7 to 4 Pole Wiring For Towing|Page 22005 > < Adapter 7 to 4 Pole Wiring For Towing|Page 22003