volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cup Holder, Replacing|Page 22787 > < Cup Holder, Replacing|Page 22785
Page 4
background image

-

Engage the handbrake and move the gear selector lever towards the rear.

-

Rotate the panel to the left for better access.

-

Remove the two screws holding the bracket with the radio and dashboard environment panel in the centre console.

-

Remove the bracket with dashboard environment panel and the radio from the centre console: Pull the lower edge out and downwards until it
releases from the mounting at the upper edge. Then fold backwards.

Note! Do not damage the removed components or the surrounding panels.

If necessary, the panel around the gear lever selector can be removed for additional space. The panel is secured with four catches on the underside along
the boot.

-

Remove the connectors from the radio and climate control panel.

-

Remove the unit.

-

Remove the three screws at the upper edge of the surround for the unit and radio and dashboard environment panel.

Cup Holder, Replacing|Page 22787 > < Cup Holder, Replacing|Page 22785