S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Note! The geometry of the seat belt in the S80 is reversed compared with the V70 (00-). The seat belt double buckle is positioned on the opposite
side.
The operation is carried out on both sides
-
Remove the screw (1). At the single buckle - remove the end mounting (2) from the centre seat belt
-
Replace the screw (1) with the new screw from the kit
-
Remove the perforated section of the insulation from under the ISOFIX bracket (3).This is to expose the existing stud (5)
-
Position the Isofix bracket (3) as illustrated
-
Install the screw (1). At the single buckle - also install the end mounting (2) for the centre seat belt
-
Install the nut (4) and washer (6) from the kit
-
Tighten the screw (1). Tighten to 40 Nm (30 ft-lb). Then tighten the nut (4). Tighten to 30 Nm (22 ft.lb).
Applies to the V70 (00-)
-
Fold the rear seat cushion back into place.
Applies to S60 and S80
-
Reinstall the rear seat cushion.
ISOFIX-Guide
ISOFIX-guide