S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Installation
Installing backrest cushion upholstery
Thread the upholstery over the backrest cushion. Secure the half moon clips as the upholstery is pulled down. Use:115 8962 CRIMP PLIERS See: Tools
and Equipment/115 8962 Crimp Pliers.
Install:
-
the Velcro seam on the reverse of the backrest cushion
-
the upholstery at the bottom edge
-
the lumbar support adjustment knob and its cover
-
the backrest adjustment knob (if applicable).
Install the head restraint. Press the head restraint down until the catches engage.
Note! Lift in the head restraint. Check that the head restraint cannot be moved upwards.
Install the front seat. See: Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat/Front Seat, Driver's Seat/Front Seat,
Replacing.
Upholstery Seat Cushion, Replacing
Upholstery seat cushion, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparatory work
Removing the front seat
Remove the front seat. See: Front seat, replacing See: Service and Repair/Removal and Replacement/Front Seat/Front Seat, Driver's Seat/Front Seat,
Replacing.
Removal
