S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Seat Track: Service and Repair
Seat Rail
Seat rails front seat, replacing
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Removal
Removing the seat rails
Remove:
-
the front seat.
-
the seat belt buckle.
-
the motor for front-rear adjustment.
-
4 x M8 stud screws.
-
the 4 rivets.
-
seat rails.
Installation
NOTE: For tightening torques, see: Specifications. See: Specifications
Installing the seat rails
Install:
-
4 rivets
-
seat rails.
NOTE: Apply a drop of locking fluid before installing the stud screws.
Install:
-
4 x M8 stud screws. Tighten
-
the seat belt buckle.
-
the motor for front-rear adjustment.