S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Wash the mating surfaces of the trunk lid using a mixture of 30% isopropanol and 70% water.
Remove the backing from the tape.
Screw the locating pins in the spoiler. Use the locating pins from the installation kit.
Note! To achieve a good result, 2 people are needed to press the spoiler onto the trunk lid.
Install the bushings in the drilled holes in the trunk lid.
Grasp each end of the spoiler and carefully slide the locating pins into the holes in the trunk lid.
Press the spoiler firmly into place on the trunk lid.
Open the trunk lid. Remove the 2 locating pins.
Apply locking fluid to the screw threads.
Install 2 M6 screws and plastic washers in the spoiler.
Tighten the screws. Tighten to 5 Nm.
Caution! Do not over tighten.
Finishing
Important information