S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Oil Line: Service and Repair
25: Turbocharger, B5254T2
Gaskets, turbocharger oil return pipes, replacing
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
Removal
Raise the car.
Remove the splash guard under the engine.
All wheel drive cars only:
Remove the bevel gear.
Oil pipe removal
Disassemble the following items:
^
the clamp between the turbocharger oil delivery pipe and the oil return pipe.
^
the bolts at the oil return pipe's connection to the turbocharger.
^
Detach the pipe from the engine block. Check that the rubber sealing ring stays with the pipe. Seal the opening in the engine block.
The appearance of the turbocharger varies from model to model. Thus, the coolant pipe must be detached before the oil pipe can be detached. On
these models, pinch-off pliers can be fitted to the input and output coolant hoses to the turbocharger to eliminate the need to drain the cooling system.
