S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
Install:
-
the hub, attaching it to the wheel spindle and drive shaft.
Use new screws. Tighten. See Specifications.
Remove the mobile jack.
-
the wheel sensor (M6). Tighten, see Specifications.
Installing the spring strut
Install:
-
the spring strut on the lower control arm. Use a large jimmy bar to bend the control arm down and align the spring strut against the control arm
-
the spring strut/lower control arm screw loosely.
Use a new screw. The screw will be tightened later.
Installing the brake disc and brake calliper
Install:
