S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Fold the insulation panel out of the way.
-
Connect the black ground cable (1) to the front ground terminal (2). Use the existing ground screw. Tighten to approx. 10 Nm (8 lbf.ft.).
-
Clamp any excess using tie straps from the kit.
-
Fold the insulation panel back into place.
-
Reinstall the seat cushion.
Installation
-
Take the right-hand front side panel in the cargo compartment, turn it over and cut out a hole as per the existing marking. Use a hard surface as
support.
-
Install the 12V socket from the kit in the hole in the panel (1).
-
Install a metal bracket and nuts. Ensure that the rectangular hole in the bracket is opposite the corresponding hole in the panel.
-
Tighten the 12V socket to the panel.
