volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7852 > < Initial Inspection and Diagnostic Overview|Page 7850
Page 24
background image

When downloading software to the car there are several stages in VIDA. The stages in VIDA are as follows:

-

Preparations

-

Verification

-

Downloading

-

If necessary a method, for example entering PIN codes for new remote controls

-

Confirmation.

The preparations include the user being asked to connect a battery charger. At which point a number of checks are made, such as of the voltage level and
the ignition key positions to see if they are correct.

A verification is then carried out. During verification VIDA compares the software, hardware and serial numbers in the car with those delivered in the
software package. If the reply via the dialog box is that the hardware has been replaced, the control module which has been replaced will not be included
in the verification. This is because the new identity of the control module does not correspond to the old identity stored in the Volvo central database.

If the verification was OK, the car continues in programming mode and the software is downloaded. If the verification was not OK, a misalignment has
occurred and the Volvo central database must be updated.

The confirmation means that a confirmation file, with the new configuration of the car, is created and sent to the Volvo central database. Upon
confirmation, the configuration of the car is updated in the Volvo central database. This is so that a misalignment will not occur at the next download.

The Volvo Central Database

The Volvo central database 
The Volvo central database has records of all the data of all the Volvo cars in the world from the 1999 model year inclusive (not including the S40 (-04)
and V40).

All the VIDA stations where software downloading is possible are connected to the Volvo central database via a local area network (LAN) or a modem.
There are two servers. One in North America and one in Europe. If communication cannot be established or if communication is interrupted with one
server, a connection will automatically be made to the other server where all the information is available.

Initial Inspection and Diagnostic Overview|Page 7852 > < Initial Inspection and Diagnostic Overview|Page 7850