volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Air Bag Control Module|Testing and Inspection > < Downloading Software And Replacing The Control Module|Page 18483
Page 23
background image

The parameter indicates whether the supplemental restraint system module (SRS) is programmed for a vehicle with a switch for the passenger airbag.
Without passenger airbag switch = the supplemental restraint system module (SRS) is programmed for a vehicle without a passenger airbag switch.
With passenger airbag switch = the supplemental restraint system module (SRS) is programmed for a vehicle with a passenger airbag switch.

Driver's seat belt buckle

The parameter indicates whether the supplemental restraint system module (SRS) recognizes whether the driver's seat belt buckle is fastened.
Fastened = the driver's seat belt buckle is fastened.
Unfastened = the driver's seat belt buckle is not fastened.

Passenger seat belt buckle

The parameter indicates whether the supplemental restraint system module (SRS) recognizes whether the front passenger seat belt buckle is fastened.
Fastened = the passenger seat belt buckle is fastened.
Fastened = the passenger seat belt buckle is fastened. Unfastened = the passenger seat belt buckle is not fastened.

Passenger airbag, status

The parameter indicates whether the supplemental restraint system module (SRS) recognizes whether the passenger airbag is enabled.
Disabled = the passenger airbag is disabled. The airbag will not deploy in the event of a collision.
Enabled = the passenger airbag is enabled. The airbag will deploy in the event of collision of sufficient force.

PAD lamp

The parameter indicates whether the supplemental restraint system module (SRS) transmits a request for the passenger airbag disconnected (PAD) lamp
to be lit.
OFF = the PAD-lamp should not be lit.
ON = the PAD-lamp should be lit.

Occupant weight sensor (OWS) status (only vehicles equipped with occupant weight sensor (OWS))

The parameter indicates if the supplemental restraint system module (SRS) receives a signal from the occupant weight sensor with a request for the
passenger airbag to be enabled or disabled.
Disabled = the supplemental restraint system module (SRS) receives a signal from the occupant weight sensor (OWS) the indicates that the occupant
weight sensor should not be enabled. Enabled = the supplemental restraint system module (SRS) receives a signal from the occupant weight sensor
(OWS) the indicates that the occupant weight sensor should be enabled.

Parameters, value

Battery voltage, SRS

Measurement range: 1-24.7 V.
The normal value is 13.5 - 14.5 V when the alternator is charging.
The value indicates the voltage at the supplemental restraint system module (SRS).

Air Bag Control Module|Testing and Inspection > < Downloading Software And Replacing The Control Module|Page 18483