S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
Clean the vertical panel surface under the member where the control module will be located. Use a mixture of 30% windscreen washer fluid and
70% water
-
Apply activator to the panel surface under the member
-
Allow the activator to dry completely, for at least 10 minutes.
-
Remove the backing from the tape on the Velcro strap for the control module. Secure the control module to the activator covered panel surface
below the member
-
Press the tape on the Velcro strap hard so that the adhesive bonds.
Installing the switch
-
Remove the blind cover plug from the 12V socket.