S60 AWD L5-2.5L Turbo VIN 59 B5254T2 (2005)
-
the bevel gear
-
the snap-ring in the connecting socket.
Installing tool
Install expander 999 5777-1 and link rod 999 5777-2 (included in extractor 9995777) on the puller cylinder.
Puller cylinder 999 5575 is used together with hydraulic pump 999 5576 (foot operated).
Alternatively tool 999 2615 can be used, which consists of a puller cylinder and a compressed air driven hydraulic pump.
Removing the connecting socket
Place a container underneath the transmission.
Ensure that the piston rod in the puller cylinder is in the outer position.
Position socket 999 5777 between the puller cylinder and the transmission. Press in the expander so that it enters the channel on the connecting socket.
Apply the puller cylinder. Check that the socket between the transmission and the puller cylinder is in contact with its support surfaces.
Remove the socket.
