S60 T5 L5-2.3L Turbo VIN 53 B5234T3 (2002)
The method can be used for different types of loudspeaker grilles. Only one type of grille and tool is displayed in the illustration.
Insert the tool down into the gap between the loudspeaker grille and the upholstery at one of the clip mountings on the dashboard.
Turn the tool 90° so that the bent section engages under the loudspeaker grille (tool in the drawing applies to welding rod (wire) tools).
Pull the tool straight up so that the loudspeaker grille releases from the dashboard.
Remove the grille by pulling the grille from the other mountings by hand.
Note!
Do not use pulling hook J45893 (see STB 135).
